AUTONET TV

Timing Belt Replacement in Willoughby

Today we want to talk to Willoughby drivers about timing belts. They're something that many drivers don't know much about and yet your vehicle won't run if it's broken – and it could cause many thousands of dollars damage if it does break. A broken timing belt is usually a tale of woe. Even though timing belt replacement is scheduled in the owner's manual, it's not the kind of thing that most Willoughby area auto owners remember because it's not well understood.

Let's review what a timing belt does. As most know, the engine's power is generated in the cylinders. A piston rides up and down in the cylinder. During the first down stroke, an intake valve at the top of the cylinder opens and air and fuel is drawn into the cylinder. Then the piston returns to the top, compressing the fuel and air mix. At the top, the spark plug fires, igniting the fuel, pushing the piston down in the power stroke. As the piston once again returns up in the final stroke of the cycle, an exhaust valve opens at the top of the cylinder and the exhaust is pushed out. The timing belt is what coordinates the opening and closing of the intake and exhaust valves. It's called a timing belt because the valves have to open and close at just the right time.

Now, not all vehicles have timing belts. Some have timing chains. Like the name implies, they use a chain rather than a belt to perform the function. It used to be that most engines used timing chains, which are extremely durable. The leading vehicle manufactures started using belts rather than chains to save money in the manufacturing process. So now Willoughby drivers and their advisors at Lakeside Certified Auto are left with a component that can break. They sort of shifted the problem to us. There are two broad categories of engine design: interference and non-interference. If the timing belt on a non-interference engine breaks, the engine simply stops running. That could be very dangerous for drivers depending on where they are at the time, but it causes no internal engine damage.

Interference vehicle engines, on the other hand, will get real messed up when the timing belt breaks, because the valves will actually fall down into the path of the pistons. Things get chewed up when that happens and it'll cost a chunk of change to repair the vehicle engine.

So, what are the warning signs? Unfortunately, there really aren't any. There aren't tell-tale sounds. In some vehicles, a technician from Lakeside Certified Auto may be able to see part of the belt for a visual inspection, but many have a cover that's in the way. The reality is that if the belt slips even one notch, it might as well be broken for all the damage it'll cause. There's no middle ground.

So how can we avoid these problems? Simply replace the timing belt when your owner's manual calls for it. It can be 60,000 miles/97,000 km; it might be 90,000 or 100,000 miles/145,000 or 160,000 km. The point is, if you have 60,000 or more miles (97,000 or more km), ask your Lakeside Certified Auto service advisor right away if your vehicle requires a timing belt replacement.

Contact Lakeside Certified Auto to learn more about your car's timing belt
You can find us at:

38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com

Sometimes Willoughby drivers can go quite a while without a failure, but we've seen them happen within a couple of oil changes of being due. It's not worth the risk.

What does it cost to replace a timing belt in Willoughby? Well, that really depends on what kind of car you have. I can tell you that it's usually not very easy to get to the timing belt – you often have to remove some accessories to get at it. It isn't a cheap procedure, but it's a fraction of what it could cost to repair the damage caused by a failure.

At Lakeside Certified Auto in Willoughby, we're all about trying to prevent repairs, keeping you and your passengers safe and increasing your driving enjoyment. 

Problems with Suspension Solved at Lakeside Certified Auto in Willoughby

A vehicle's suspension system is tough. It can last for years and after lots of driving for Willoughby drivers. But it can be damaged quickly by hitting a pothole, curb or rock, and it can wear more quickly if you frequently drive off-road or on bumpy roads. A workhorse vehicle — one that hauls heavy loads — is also going to be hard on its suspension system.

Because the useful life of your suspension system contains these elements of unpredictability, it is important for Willoughby drivers to have them inspected periodically. Worn, broken and missing parts can be identified during an inspection at Lakeside Certified Auto . An ineffective suspension system will decrease the driver's control over a vehicle, so when it is damaged it frequently leads to the worst kind of vehicular damage — dangerous accidents.

The suspension system is composed of springs and shock absorbers (or shocks). Springs suspend the weight of the vehicle above its axles. They allow the vehicle to “bounce” over bumps, which reduces the force of the impact on the vehicle. Shocks reduce the rebound of the “bounce,” smoothing out the ride of the vehicle. They also force the tires to retain constant contact with the road. Shocks are responsible for “handling performance,” or the ease with which the driver controls the vehicle.

The springs in the suspension system are heavy-duty and rarely break or wear out. Shock absorbers are tough, too, but they will wear out.

Your vehicle might be equipped with struts. Struts are a combination spring and shock absorber. Struts, like shocks, have a limited life span.

Inspecting shocks or struts for damage and wear should be part of your preventive maintenance routine. Since a good suspension system is ultimately a safety feature of your vehicle, it's always better to be proactive about its care. In this case, good car care can prevent accidents.

There are some signs that will warn you that your suspension system may be in need of attention. One of the signs might be a cupped wear pattern on your tires. This is caused by the shocks bouncing unevenly. Other signs of bad shocks manifest themselves in the handling performance of your vehicle. You may notice a drifting sensation when cornering, often referred to as a “floaty” feeling. If the front of your vehicle dips significantly when you brake or if it rocks back and forth after stopping, it's time for new shocks. Your technician at Lakeside Certified Auto will check your shocks visually. If they're leaking, they need to be replaced.

Any one of these symptoms warrants an inspection of the suspension system. You should also get your suspension system inspected if you are involved in an accident involving one of your wheels. Willoughby drivers should never put off suspension repairs. If you experience suspension system failure, it can cause a serious accident. If one of your shocks needs to be replaced, then replace all four of them. This allows for even handling of the vehicle. Replacing just one of the shocks is rarely good auto advice.

When you replace your shocks or struts, use parts that are equivalent to — or better than — the original shocks on the vehicle. The original equipment was for the weight and expected use of the vehicle, and Willoughby drivers should never downgrade.

Upgrading, however, is another matter for Willoughby drivers. If your suspension system gets a workout or you just want to improve your vehicle's handling performance, then you should upgrade to a better shock. If you haul heavy loads around Willoughby or tow a trailer, then you should definitely be getting heavy-duty shocks.

 Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com

Have a Ball! Know your Ball Joints (Ball Joints)

We all have joints in our own skeletal system, but did you know your vehicle has some joints of its own? One of the most important is called a ball joint.

One of the interesting things is that it's somewhat similar to the ball and socket joints we have in our hips and shoulders.  A ball joint allows two parts it joins together to move in more than one direction at the same time.

Think about your wheels.  They have to move up and down when there are bumps in the road but in sideways directions when you are making a turn. As you can see, the ball joints are important for your steering and handling to work correctly.

Since ball joints do so much, they can wear out and become loose.  When the ball wears down or the socket gets worn, there can be too much play in them.  It can get so bad that the ball can come out of the socket and your wheel can fall off, a dangerous situation.  Ball joints can also seize up.  Some of them are sealed and never require maintenance; others require periodic lubrication.

Here are some signs that your ball joints are going bad:

• Your vehicle pulls to one side
• You can hear a clunking noise coming from a wheel area
• Your tires are wearing unevenly, especially on the inside

The earlier a failing ball joint is discovered, the better. The best way is to have regular inspections by a technician.  Your service facility will periodically check ball joints at intervals recommended by the manufacturer. The cost to replace them can vary widely depending on whether you have a vehicle with a 2-ball or 4-ball configuration.  Also, sometimes just the joints can be replaced, but other times they are part of a larger control arm assembly that has to have all the parts replaced at the same time. 

Your vehicle's proper steering, handling and tire wear all contribute to a better, safer driving experience.  Make sure your ball joints are up to the job.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com

Getting from E to F (Fuel Gauge Problems)

Who thinks about their fuel gauge?  You probably don't… until it doesn't work any more.  Then you have to guess how much fuel is in your tank, and that's no way to live life on the road. 

Fuel gauges, like every other part in your vehicle, can fail.  And when yours stops working, you will probably want to head over to your service facility soon, because no one relishes running out of fuel.

The fuel gauge system is much more than just the gauge you can see on your instrument panel. Most systems have a float inside the fuel tank that goes up and down depending on the fuel level.  It's called the fuel sending unit, and it sends an electrical signal to the gauge (on the dash) telling it to display how much fuel is left in the tank. 

So, what could go wrong?  Well, a few things.  For one thing, corrosion from bad fuel can cause it to stick and it won't move up and down any more.  So you could fill up your tank and the gauge would still read Empty.  If a sending unit needs to be replaced, often the parts can be costly. The good news is that fuel sending units rarely fail and most drivers will never have one go bad.

Other things that can go wrong? An electrical problem could cause a fuse to blow and you won't get a reading at all.  A technician can figure out where that electrical problem is and how to repair it.  Finally, it's possible for the gauge itself (on the instrument panel) to fail.

One thing to keep in mind is if your fuel gauge isn't working, you might be tempted to carry around an extra container of fuel.  That's ok if it's outside the cabin, such as in the bed of a pickup.  But if you carry it inside the cabin or trunk, fuel fumes can be very dangerous for your health, even fatal.

A working fuel gauge gives you peace of mind… so you'll never have that "empty" feeling.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com