AUTONET TV

Have You Checked Your Headlights?

Like everything in the OH automotive market, there have been great strides in headlight technology in recent years. OH drivers can be safer at night because of it. Good headlights improve visibility on Willoughby roads, enabling you to see farther. They also improve your peripheral vision, helping you to see the sides more clearly. The more you can see, the more quickly you can react to road conditions. This is because nearly half of traffic fatalities take place at night. And as Willoughby resident population ages, everything that helps older eyes is welcome.

Most new vehicles sold in OH come with halogen headlamps. A decade ago, halogens were exotic and expensive. Now that they are standard equipment, the price has come way down. Many luxury cars are equipped with high intensity discharge, or HID, headlamps. You have probably seen them on some Willoughby roads; they're very bright and have a bluish tint.

From behind the wheel, there is no doubt that HID headlamps are the best thing going. However, many Willoughby drivers complain about HID lights in oncoming traffic or when they approach from behind. In fact, when the National Highway Traffic Safety Administration called for public comment, they received a record number of complaints about HIDs. This has lead to several studies - your tax dollars at work. Some expect future regulation of HID lamps.

All halogen headlamps dim over time. Your service advisor at Lakeside Certified Auto recommends that they be changed out once a year. We suggest you replace your headlamps in the fall at the end of Daylight Saving Time. It's easy to remember; when you change your clock, change your headlamps. Remember to replace all headlamps at the same time; then all your lights will be equally bright. You will appreciate it during those long OH winter nights.

If you have an older vehicle with old-school headlamps, you might be able to get a halogen replacement. You'll be amazed at the difference this upgrade will make.

In addition to regular halogen lamps, Willoughby vehicles can upgrade to premium lamps that filter some of the yellow light, making a bright white light that's more like natural sunlight. This light's easier on the eyes and should improve reaction time.

Now, you may be able to step up to HID headlamps, depending on the kind of car you drive. These lamps should last the life of your car, but cost several hundred dollars a pair. If you want other Willoughby vehicles to think you're running HID lamps, you can even buy regular halogens that have a bluish tint. Does she or doesn't she? Only her Lakeside Certified Auto technician knows for sure.

Over time, plastic headlight covers can get cloudy or yellowed. In fact, AAA reports that nine out of ten headlights are dirty or yellowed, greatly reducing vision. In addition to helping you replace your headlamps, many service centers such as Lakeside Certified Auto in Willoughby, OH, can restore headlight covers. Headlights can be restored at a fraction of the cost of replacing them.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com

When Are Your Tires Worn Out?

Hey Willoughby area drivers, are your tires worn out? What is the standard for our OH streets? How can you tell on your vehicle?

While there may be legal requirements for the Willoughby area, there are safety concerns that go beyond meeting minimum replacement mandates.

Two-thirty-seconds of an inch is the depth of the tire tread wear indicator bars that US law has required to be molded across all tires since August 1, 1968. When tires are worn so that this bar is visible, there's just 2/32 of an inch – 1.6 millimeters – of tread left. It's that level of wear that's been called into question recently.

We're referring to the tread depth on a tire, it can't move surface water out of the way and you start to hydroplane.

In a safety study, a section of a test track was flooded with a thin layer of water. If you laid a dime on the track, the water would be deep enough to surround the coin, but not enough to cover it.

A car and a full-sized pick-up accelerated to 70 miles per hour, or 112 kilometers an hour, and then made a hard stop in the wet test area. Stopping distance and time were measured for three different tire depths:

• New tire tread depth
• 4/32 of an inch, or 3.2 mm
• 2/32 of an inch, or 1.6 mm

So what happened with the 2/32 inch/1.6 mm tires on the car? Get this – when the car had traveled the distance required to stop with new tires, it was still going 55 mph/89 kph. Stopping distance was nearly doubled to 379 feet/116 meters, and it took 5.9 seconds.

Wow! That means if you barely have room to stop with new tires, you would hit the car in front of you at 55 mph/89 kph with the worn tires.

Now, with the partially worn tires – at 4/32 of an inch, or 3.2 mm – the car was still going at 45 mph/72 kph at the point where new tires brought the car to a halt. It took nearly 100 feet, or about 30 meters, more room to stop and 1.2 seconds longer. That's a big improvement. We can see why Consumer Reports and others are calling for a new standard.

Of course, stopping distances were greater for the heavier pick-up truck.

How do you know when your tires are at 4/32 inch or 3.2 mm? Easy; just insert an American quarter into the tread. Put it in upside down. If the tread doesn't cover George Washington's hairline, it's time to replace your tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

You may remember doing that with pennies. A penny gives you 2/32 inch, or 1.6 mm, to Abraham Lincoln's head. The quarter is the new recommendation – 4/32 inch, or 3.2 mm.

How do people feel about replacing their tires earlier? Well, tires are a big ticket item and most people want to get the most wear out of them that they can. But do you want that much more risk just to run your tires until they are legally worn out?

For us, and we would guess for many, the answer is "no".

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com

Lakeside Certified Auto Guide to Using the Correct Fluids in Your Vehicle

Today's Lakeside Certified Auto post focuses on using coolant. If you pour in the wrong kind, it won't protect the cooling system and may even void the warranty. Check your vehicle owner's manual. Of course, your Lakeside Certified Auto service advisor will know the proper coolant for your vehicle.

Brake fluid is confusing for some Willoughby drivers. Back when we opened Lakeside Certified Auto, most vehicles used Dot 3 brake fluid. Now we have Dot 4 and Dot 5. Some Willoughby residents mistakenly think the higher numbers are an upgrade. You know, if 3 is good then 4 must be better. That's not how it works. They are different formulations to meet the demands of differences in brake systems. Only one of them is designed for your vehicle.

Ditto for transmission fluid. For decades there were two basic types of tranny fluid used at Lakeside Certified Auto: friction modified or not. With the tremendous engineering advances in vehicle automatic transmissions, there have been several new types of fluids developed to protect and lubricate them.

Nowhere are the advances in automotive fluids more evident to Lakeside Certified Auto professionals than in motor oil. Many new weights and formulations have been created to meet the demands of today's high-tech vehicle engine design. Modern engines have more parts and much tighter tolerances.

That's where the new grades of engine oil come in. They have to be formulated to lubricate, protect and clean all of those vehicle engine parts, big and little. The oil has to be thin enough to get into little passages, yet resistant to vaporization.

At Lakeside Certified Auto in Willoughby, we believe that in some ways modern automotive fluids are just as impressive as the new engines. Because weights of oil and types of coolant and transmission fluid are so carefully matched to the vehicle, make sure you always use the proper fluid if you are topping off at home.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com

Timing Belt Service to Save Big Bucks in Willoughby

Your engine is like a finely choreographed dance. All the parts have to work together. If the timing is off at the ballet, dancers crash into each other and fall down. It the timing is off in your engine, it may not run at all. One of the most intricate dances in your engine has to do with the combustion cycle.

Your vehicle engine has cylinders in which a piston travels up and down. At the top of the cylinders are valves that open to bring in the air and fuel. And there are valves that open to let out the exhaust after the fuel has been burned.

Call Lakeside Certified Auto at (440) 946-0076 for answers about your timing belt, or drop by our Willoughby, OH, service center on 38525 Lakeshore Blvd.

It's critical that the values be timed to open and close at precisely the right time in the combustion cycle, or the engine will run poorly or not at all.

The timing belt is responsible for rotating the shafts that control the valves. It's vital and precision work. Timing belts are made of very tough, flexible material. They can last a long time. But they eventually wear out and can break. The consequences can be disastrous.

In some engines, the valves actually protrude far enough into the cylinders that they could come in contact with the piston. If the timing belt breaks, the pistons will smash into the valves. Valves get bent or broken. If the engine is spinning fast enough, the broken parts will shred the cylinder head as well. Repairing this damage can cost several thousand dollars.

It's a sad day when this happens; especially since it usually can be avoided. Manufacturers have issued recommendations for when you should replace your timing belt. For some engines, it's at 60,000 miles/97,000 km. For others it's at 90,000 miles/145,000 km or more. If you're approaching 60,000 miles/97,000 km or have passed it, make sure you check your owner's manual or with your Willoughby auto service advisor at Lakeside Certified Auto for when the timing belt should be replaced. Don't let this one slip by.

Now some timing belts are visible and can be inspected. Others are hidden under a protective cover and are hard to get to. Some timing belts also drive the water pump. If you have a leaky water pump, the coolant will contaminate the timing belt and could make it fail sooner. So if you have this kind of engine, get it in to Lakeside Certified Auto for an inspection right away if you have a coolant leak.

Most people in the Willoughby area with this engine design end up with a new timing belt when they replace the water pump. And when you're having your timing belt replaced on schedule, check with your Lakeside Certified Auto auto service advisor to see if it makes sense to install a new water pump, even if it isn't currently having problems, since most of the labor is already being done any way for the timing belt replacement.

As a heads up; larger engines will often have metal timing chains rather than belts. The chains don't need to be replaced like belts.

We've already told you how very expensive it can be to get your car running again after a timing belt fails. You also need to know that replacing the timing belt is very labor intensive and is one of the most costly maintenance services you will have. So if you will be at the point where your timing belt should be replaced in the next year or so, ask for an estimate from Lakeside Certified Auto in Willoughby, OH, so you can begin to prepare for the expense.

We at Lakeside Certified Auto, your Willoughby service center, can be a valuable partner. Please take advantage of our knowledge and experience.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com